← All tools

Grid Generator

Your laser bed, on a grid.

A precision alignment grid generated for your exact machine. Burn it onto scrap cardboard once — place every blank perfectly, forever.

Get the Grid Generator — $9 →

The problem

Placement, solved

A generic printout doesn't fit your bed. A grid built for your exact machine does.

Without AlignmentBud

  • ✕Eyeball the placement and hope it’s centered
  • ✕Frame it, nudge it, frame it again
  • ✕Cut anyway because you’re out of patience
  • ✕Realize afterward it’s off by a few millimeters

With AlignmentBud

  • ✓Burn the grid onto scrap cardboard once
  • ✓Read the exact X/Y coordinates for your blank
  • ✓Place it on the marked position
  • ✓Hit start, knowing it’s dead center

What's in the file

Three layers, zero guesswork

GRID_LINES

10mm reference grid

Hairline lines every 10mm, built to score at low power. Your permanent coordinate system, burned right onto scrap cardboard.

CENTER_CROSSHAIR

Center crosshair

Heavier full-length axis lines through dead center of your bed. Your primary alignment reference for centering any blank.

FRAME_BORDER

Outer frame border

A cut line at your exact bed dimensions. Trim the cardboard flush, or leave the layer off — your call.

Process

How it works

01

Pick your machine

40+ lasers in the database — Glowforge, xTool, OMTech, Thunder, and more. Or punch in custom dimensions.

02

Download your files

SVG + DXF sized to your exact bed, with the correct origin corner baked in. Plus a quick start guide.

03

Burn it onto cardboard

Low power, high speed, one pass. Pin scrap cardboard to your bed and score the grid into it.

04

Place blanks with confidence

Drop any blank on the grid and read its exact position. No more eyeballing, no more ruined material.

Coverage

Sized to your machine — not close enough

Popular bed sizes below, but the generator builds your grid at your exact dimensions — 40+ machines in the database plus fully custom sizes up to 3000mm.

300 × 200 mmSVGDXF
400 × 400 mmSVGDXF
600 × 300 mmSVGDXF
600 × 400 mmSVGDXF

One saved blank pays for the grid.

A crooked cutting board

$12–$30

A ruined tumbler wrap

$6–$15

A misaligned slate set

$10+

Stop eyeballing. Start aligning.

Generated for your exact machine. Instant download.

Get the Grid Generator →

Or see the full toolkit + bundle →